Calibrate Leak Cable

To calibrate the leak cable and avoid false alerts, follow these steps:

1. Ensure that the leak cable is properly connected to the LeakNet device and that there is no water in contact with it.
2. Click on the “Calibrate Leak Cable” button.
3. A confirmation dialogue box will appear, asking if you want to proceed with the configuration. Click “OK” to proceed or “Cancel” to abort.
4. If you click “OK,” the configuration process will start. During this process, the leak cable will receive a value that will be used to trigger alerts.
5. Once the configuration is complete, the device will display a message indicating whether it was successfully configured or not.