Water leak detection over a length of high-sensitivity cable, made from durable and eco-friendly material.

If the Leak cable detects any water present, the user is immediately notified through FlowReporter and can automatically shut the water off if required.

Based on the detection principle of water conductivity, water leakage can be quickly detected once water appears anywhere along the sensing cable.

Comes in lengths of 5m, 25m or 100m and includes easy-to-install cable fixing clips.

Connecting LeakCables.

LeakCables can be connected to the Gen2 Leaknet devices. With leader cable, use red and black. Without the leader cable, use the 2 black cables.

• Then add the device to the flowreporter. For that go to the base settings page
  (Dashboard → Flow Sensors → Select your Device → settings → Base setting(In device details section).
• Mark the check box – Attach Leak cable.

Now your Leakcable is ready for detecting leaks.

To access your leak cable list, simply click on the “Leakcables” radio button located on the dashboard.
Then you can access your Leakcable alerts, related settings by selecting your leakcable.

See more about enabling the alert and other settings here.